Wind Generator Plans

Building a wind generator to supplement power generated by solar panels. Finding plans that are easy to read and fully turned out quite a bit harder than I expected. After trying out a bunch of different plans and find them all that garbage, I decided to make his plan to wind generators.

the first thing I decided to do it in their demands for projekt.Prvi step was to figure out how much power I wanted to produce. I kind of went overboard and decided to 1kW wind generator. There is also the possibility of vertical or horizontal axis wind generator (I chose the horizontal, because it's easier ... they are the ones at the top of the tower, which has 3 blades ).

Now, when I had the requirements for my project I had to figure out how to fulfull.Vjetar generator had to be pretty cheap because I did not really have a lot of money at that time. I discovered that you can cut PVC pipe and makes a pretty good blade, so I started on them. They have a couple of hours to build (and balance) and then I paint them coated layer (UV protection for PVC becomes brittle when exposed to sunlight for long periods of time ).

I heard that people in old Ametek motors as generators in wind generators, so I decided to use one as well. I have it mounted on my body (a piece of 2x4), using something called the all-round.Motor still need to be covered for protection from the weather, so I made ​​one cut a PVC pipe and fell over the engine. I broke down and bought the center because it is not that expensive, and I do not know how to balance them.

After connecting the blades and hub assembly all together on the motor shaft, I have almost finished. Everything I needed to finish the tail and add prirubnica.Rep is made of a steel rod from the hardware store, and some plexiglass that I left behind the building of solar ploča.Rep looks pretty neat because it was clear.

The final step was to put the flange on the lower side of the body and attach a steel pipe for him. This will allow me to drop a wind generator at the top of the tower that will allow you to move as well.

I thought that the findings of the tower will be the hardest part of the build, but it was pretty easy. I was there with a friend helping him re-shingle the roof and noticed it still had a TV tower up despite being switched to satellite a few years. He looked pretty strong and it even had a hole in the top that I could use to mount the wind generator. I asked him if I could have and he said: "Yes, I never use the thing over and it's an eyesore." If only you knew how much it is worth to me!

I got a tower house (can be disassembled), and immediately built a concrete foundation and a good rose. After installing the wind generators on top of and praying that it will work I hooked up the charge controller only to find that I am a big fan.

That's when I learned that you need to hook diode inline with the wires coming from wind power generator so that they can move in one direction. After fixing that little bug of course it is not windy for a couple of days. We were out getting groceries, and although the wind had kicked up, so I hurried home to see if the wind generator spinning.

I could not believe it! I got home and it was sitting on top the tower spinning away happily producing energy for home.

Read More..

Making Wind Generator Blades

Development of the wind generator blades is a great way to save money on the first wind generator to build. My recommendation to everyone is to start with a pair of homemade blades and when the wind generator has saved you a bunch of money to move to a good set of knives from fiberglass. Lets look at how to build a wind generator blades.

Wind generator blades can be made of wood or PVC. I do not recommend building any wind generator blades made ​​of wood for several reasons. The first reason is that no matter how well you coat the blade with water protectant one of them is bound to be a little chip in it. May it be big enough for you to see, but most of the time you'll be hard pressed to find it. When this crack makes wood absorbs moisture will start to make it harder than other blades. This will lead to unbalanced blades that will wobble a little. If not caught in time imbalance can completely break off blade (they move fast and they are heavy, so get to serious injury). Wooden blades are the times that and it is quite complicated (you have to airfoil shape, etc.). I prefer to use PVC as well as the blades may be constructed and balanced in the afternoon, and performed quite well for what they cost.

To all three blades all you need is one part of the 4 "or 6" PVC pipe that is less than 4 "long. For blades that are less than 30" long you can use a 4 "diameter PVC but if your blade is between 30 "and 48", you will need to use more 6 "PVC pipe. I do not recommend building the wind generator blades longer than 48 "while the PVC begins to bend quite malo.8 foot diameter wind generator will continue to produce enough power though, so you can save up for a good set of knives windmax.

you need to do is mark down the central tube, but do not cut it! Blades actually move in this environment because they catch the wind better (meaning more energy produced). The blades taper from about 5 "at base of 2 3 / 4 "at the top. When you have marked where the cut will look like you are cutting a very strange shape, but do not worry this is how it should look like.

Cutting blade is just the first part of the wind generator blades. You also have to sand all the edges down so they are smooth. You will notice a marked difference is.

Before we can balance the blades is also necessary to put several coats of UV protective paint on them. PVC becomes brittle when exposed to sunlight for long periods of time. Putting the two layers of UV paint on them, they will stay nice and strong for as long as you use them. Any color will work as long as he says, "UV protected" on it. If you are unsure just ask someone at the hardware store. Tell them that you are looking for colors with UV protectant in it.

Now all you need to do is balance the blades. To do everything you need to do is to be mounted on the hub and place the center of something that turns easily (a piece of steel rod with some bearings pillow block works well. Just give the blades a good spin, and record what one ends up at the bottom (number of blades ). After a few turns the blades will appear at the bottom more than others. just a bit of equipment at the end of the blade off and repeat the process. It does not take too long and balanced blades are much safer than an unbalanced (remember unbalanced wood blades ?).< / P>

This is pretty much everything to make wind generator blades. This can be done in the afternoon, and they will last quite a long time (plus they look pretty good too). If you're interested in learning how to build a wind generator simply click the link to the right that says "Become a member" or join our newsletter.

Read More..

How to Make a Wind Generator to Power Your Household Appliances

Because of the uncontrolled price of conventional energy sources such as fossil fuels, green and renewable energy sources has become one of the most common items in every conversation. People are now focusing on how to make a wind generator that is efficient enough to turn off the network domova.Stimulišući technologies that offer clean and sustainable energy source that is free and outside the network has captured the interest of many individuals. Place or places that are stable and high amount of wind are the main sites for the construction of wind powered generators that will help you to supply your domestic electrical requirements. While making the wind generator itself can be quite a challenge, it is quite possible.

making your own homemade wind generator, you should first measure the wind around your property and in the general area by using the anemometer. Look for the anemometer, which you can easily set up and get back to the end of the day. Check the results of their research by looking at statistics such as maximum wind speed and average wind speed. Be sure to measure wind speeds at various locations several times to establish the best place to build your wind generator. Generally, ten miles an hour wind speed will produce approximately one hundred watts of electric power system with wind generator blade diameter of four meters.

If you carefully observe some of the how-to guide wind generator, you will learn that you can convert the drive motor into a stable treadmill magnet alternator. Try to break open the housing treadmill for access to the generator. It should read "permanent magnet motor." Carefully attach the base of the blades of the turbine housing to the flywheel, which is firmly attached to the end of the treadmill motor. Put in a blocking diode, which will be located between the engine and deep cycle battery to make sure that it will not drain the battery.

Now you can get the scenery, so you can start carving his blades. The most important features in your propellers are number of blades to use, as well as the length or diameter. Keep in mind that the larger the blades, the more the wind will be captured by the system, which can generate a greater amount of electricity. However, a larger blade, the slower it will spin. In other words, large knives are only suitable for areas with strong wind speeds.

When assembling your center, make sure it is large enough to accommodate the treadmill power generators, which will be converted to a permanent magnet alternator. Securely fastened to the front of the turbine casing, a tail in the back. Carefully weld the permanent magnet motor to the housing center for wind generators. If it is possible to join them, without welding, perhaps using zip ties or other material joining, such as strong adhesive or bolts and screws, and then it would be better.

Connect the appropriate wire from the generator to the deep cycle battery. Make sure that when you put the electricity regulator in the circuit, it is between the battery and generator. In this way, your system can block any excess electricity from the battery goes and shortens their lifespan. Now you've done the impossible and learned how to make a wind generator on your own.

Read More..

How to Make a Wind Generator to Power Your Household Appliances

Because of the uncontrolled price of conventional energy sources such as fossil fuels, green and renewable energy sources has become one of the most common items in every conversation. People are now focusing on how to make a wind generator that is efficient enough to turn off the network domova.Stimulišući technologies that offer clean and sustainable energy source that is free and outside the network has captured the interest of many individuals. Place or places that are stable and high amount of wind are the main sites for the construction of wind powered generators that will help you to supply your domestic electrical requirements. While making the wind generator itself can be quite a challenge, it is quite possible.

making your own homemade wind generator, you should first measure the wind around your property and in the general area by using the anemometer. Look for the anemometer, which you can easily set up and get back to the end of the day. Check the results of their research by looking at statistics such as maximum wind speed and average wind speed. Be sure to measure wind speeds at various locations several times to establish the best place to build your wind generator. Generally, ten miles an hour wind speed will produce approximately one hundred watts of electric power system with wind generator blade diameter of four meters.

If you carefully observe some of the how-to guide wind generator, you will learn that you can convert the drive motor into a stable treadmill magnet alternator. Try to break open the housing treadmill for access to the generator. It should read "permanent magnet motor." Carefully attach the base of the blades of the turbine housing to the flywheel, which is firmly attached to the end of the treadmill motor. Put in a blocking diode, which will be located between the engine and deep cycle battery to make sure that it will not drain the battery.

Now you can get the scenery, so you can start carving his blades. The most important features in your propellers are number of blades to use, as well as the length or diameter. Keep in mind that the larger the blades, the more the wind will be captured by the system, which can generate a greater amount of electricity. However, a larger blade, the slower it will spin. In other words, large knives are only suitable for areas with strong wind speeds.

When assembling your center, make sure it is large enough to accommodate the treadmill power generators, which will be converted to a permanent magnet alternator. Securely fastened to the front of the turbine casing, a tail in the back. Carefully weld the permanent magnet motor to the housing center for wind generators. If it is possible to join them, without welding, perhaps using zip ties or other material joining, such as strong adhesive or bolts and screws, and then it would be better.

Connect the appropriate wire from the generator to the deep cycle battery. Make sure that when you put the electricity regulator in the circuit, it is between the battery and generator. In this way, your system can block any excess electricity from the battery goes and shortens their lifespan. Now you've done the impossible and learned how to make a wind generator on your own.

Read More..